View Larger Image
|
|
CMP
Certified Coated Metal Plates |
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, certified coating thickness standards have measured values traceable to a National Metrology Institution. |
 Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder | | Ideal for use in the calibration lab, in the field or on the factory floor | | Certified and labeled in both Metric and Imperial units |
| | Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage | | Individually serialized for traceability to NIST or PTB - includes a Certificate of Calibration |
|
  |
 |
Order Code |
Ideal
for |
Coating/
Substrate |
S1 |
PosiTector
6000
F, FS, FRS, FN, FNS, FNRS
PosiTest F & FM
|
Epoxy
on Steel
(Ferrous) |
S2 |
PosiTector
6000 F0S, F45S, F90S
PosiTest DFT Ferrous & Combo |
S3 |
PosiTest G & GM
PosiPen A, B & C |
A1 |
PosiTector
6000
N ,NS, NRS, FN, FNS, FNRS |
Epoxy
on Aluminum
(Non-Ferrous) |
A2 |
PosiTector
6000
NAS
, N0S, N45S, N90S
PosiTest DFT Combo
|
A3 |
PosiTector
100B, 200, 200B |
| Order Code |
Approximate Thickness |
Accuracy |
| Plate 1 |
Plate 2 |
Plate 3 |
Plate 4 |
S1 |
0 |
75 um
3 mils
|
250 um
10 mils
|
1500 um
60 mils
|
± 0.43 um
± 0.017 mil
|
S2 |
0 |
75 um
3 mils
|
250 um
10 mils
|
1000 um
40 mils
|
S3 |
0 |
15 um
0.6 mils
|
40 um
1.6 mils
|
100 um
4 mils
|
A1 |
0 |
75 um
3 mils
|
250 um
10 mils
|
1500 um
60 mils
|
± 0.43 um
± 0.017 mil
|
A2 |
0 |
75 um
3 mils
|
250 um
10 mils
|
500 um
20 mils
|
A3 |
75 um
3 mils
|
125 um
5 mils
|
250 um
10 mils
|
500 um
20 mils
|
|
|
|
