Rotating Torque Tester

NTS Series
Rotating Torque Tester

NTS-6 is a motorized friction torque tester that tests the smoothness of rotation of bearings, tightness of oil seals, etc. while turning the sample.

Torque data can be continuously output via RS-232 enabling you to display a torque profile using data acquisition software.

Peak, Real Time and Continuous Output measuring modes (selectable)

Programmable high/low setpoints for Go/No go testing

RS-232C output n Both CW and CCW operation

Model	Range
NTS-S1	0.08 - 0.80 Lb-in
NTS-S2	0.17 - 1.70 Lb-in
NTS-S5	0.43 - 4.30 Lb-in
NTS-S10	0.30 - 9.00 Lb-in
NTS-S20	0.30 - 18.00 Lb-in
NTS-S1oz	0.30 - 14.00 Oz-in
NTS-S2oz	0.30 - 28.00 Oz-in
NTS-S5oz	3.0 - 70.0 Oz-in
Alternative Unit Calculator- recasts values in above table (units in RED can be selected on gauge. Other units for reference only)

Accuracy	±1% F.S., 1LSD
Measuring Range (at the time of Track)	S1/oz: 3.0~100mNm S2/oz: 3.0~200mNm S5/oz: 0.030~0.5Nm
Max. Rotational Speed (no-load)	S1/oz: 85 rpm S2/oz: 30 rpm S5/oz: 13 rpm S10: 18 rpm S20: 18 rpm
Display	4 digit LCD display
Operation	Both CW and CCW motorized rotation
Measuring modes	PP: Peak Mode displays PEAK torque value that will not change until a higher value is measured. GO: Real Time Mode displays TRANSIENT torque values. RG: Output Torque Data every 1/100 seconds.
Measurement start time	Can be set up to 1 second in 0.1 second increments.
Measuring time	Time can be programmed between 1 and 20 seconds.
Go/No go testing	Programmable High and Low values; Green lamp (OK solid, NG blinking).
External input/output	Signal output (open collector): Go and No Go Data output: RS-232C (9600 baud) External start switch input
Data memory	400 data
Power supply	AC100V~240V
Bit size	4mm diameter