|
|
|
RX2/BX2
Narrow Web/Tape Tension Meter |
BX2 - Single Flanged Rollers
RX2 - Dual Flange Rollers
Cylindrical rollers are offered in 7, 10, 15, 20, 30, 36, 41 and 50 mm lengths to measure tapes, bands, films and similar materials. Roller length should not exceed 2x the width of the material being measured.
NOTE: Models using 50 mm roller lengths are supplied with a special heavy-duty bracket and use the DXX model designation.
 Finger Support: We recommend
mounting a finger support for
higher tension ranges
Note:This model does not include a material thickness compensator |
 Dual-flanged outer guide rollers with various widths for better filament guide
(single-flanged rollers optional, recommendable if the material being measured is wider than the tape roller) | | Tape rollers with contact surface from 7 mm up to 50 mm are available |
| | Roller shifting mechanism ensure easy acquisition of the running material |
|
| Model |
Range | Outer Roller
Spacing | Roller Widths |
RX2-5
BX2-5 |
10 - 50 g | 55 mm | 7 |
RX2-12
BX2-12 |
20 - 120 g | 55 mm | 7,10,15,20,30 |
RX2-20
BX2-20 |
20 - 200 g | 55 mm | 7,10,15,20,30 |
RX2-40
BX2-40 |
20 - 400 g | 55 mm | 7,10,15,20,30 |
RX2-200
BX2-200 |
200 - 2000 g | 117 mm | 7,10,15,20,30,36,41,50 |
RX2-500
BX2-500 |
400 - 5000 g | 117 mm | 7,10,15,20,30,36,41,50 |
RX2-1K
BX2-1K |
2.5 - 10 kg | 117 mm | 7,10,15,20,30,36,41 |
RX2L-2K
BX2L-2K |
5 - 20 kg | 167 mm | 7,10,15,20,30 | | |
Calibration to customized material:
If process material differs significantly from the standard calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 15 ft. should be supplied. |
| |
|
Roller Guide
Available Rollers for Hand-Held Tension Meters |  |
| | Click image for more info | | ___________________________________________ |
|
DXR
Tape & Band Tension Meter |  |
| | Click image for more info | | ___________________________________________ |
|
TX2
Tape Tension Meter with rollers point away from operator |  |
| | Click image for more info
|
| Roller Widh |
Line Speed
 ...m/min |
Roller Material |
| 7 mm |
1000 | Nickel-plated steel |
| 10 mm |
1000 | Hardcoated aluminium |
| 15 mm |
1000 | Hardcoated aluminium |
| 20 mm |
1000 | Hardcoated aluminium |
| 30 mm |
1000 | Hardcoated aluminium |
| 36 mm |
1000 | Hardcoated aluminium |
| 41 mm |
1000 | Hardcoated aluminium |
| 50 mm |
1000 | Hardcoated aluminium |
Air Damping (A)
An adjustable, precision air dashpot provides steady
tension reading as tension fluctuate. |
 |
| |
Lever (L)
A heavy duty, lever-operated mechanism moves the outer rollers
for easy acquisition of the running filament. Recommended for models of
10 Kg or higher. |
 |
| |
Memory Pointer (M)
Designed to retain the peak value as tensions fluctuate.
Manually reset by using the knob located in the center of the dial. |
 |
| |
|
Note: Model RX2/BX2-50 is not available with memory pointer |
| | | | The RX2/BX2 Tension Meter is supplied as a complete kit including meter and instruction manual in a foam-fitted hard-plastic carrying case. |
 |
|
Accuracy
|
± 1% of full scale or
± 1 graduation mark on scale
|
|
Diameter of Scale
|
41 mm
|
|
Maximum Speed
|
1000 m/min
|
|
Roller Material
|
Hardcoated aluminium
|
|
Housing Material
|
Die-cast aluminum
|
|
Temperature range
|
50 - 113°F (10 - 45°C)
|
|
Air humidity
|
85 % RH, max.
|
|
Housing dimensions(L x W x H)
|
7.5 x 3.3 x 1.8 in(188 x 85 x 45 mm)
|
|
Weight, net (gross)
|
1.2 lbs (3 lbs)
|
|
|
