View Larger Image
|
|
NTS Series
Rotating Torque Tester |
 NTS-6 is a motorized friction torque tester that tests the smoothness of rotation of bearings, tightness of oil seals, etc. while turning the sample.
Torque data can be continuously output via RS-232 enabling you to display a torque profile using data acquisition software. |
 Peak, Real Time and Continuous Output measuring modes (selectable) | | Programmable high/low setpoints for Go/No go testing |
| | RS-232C output n Both CW and CCW operation |
|
| Model |
Range |
NTS-S1 | 0.08 - 0.80 Lb-in |
NTS-S2 | 0.17 - 1.70 Lb-in |
NTS-S5 | 0.43 - 4.30 Lb-in |
NTS-S10 | 0.30 - 9.00 Lb-in |
NTS-S20 | 0.30 - 18.00 Lb-in |
NTS-S1oz | 0.30 - 14.00 Oz-in |
NTS-S2oz | 0.30 - 28.00 Oz-in |
NTS-S5oz | 3.0 - 70.0 Oz-in |
| |
Alternative Unit Calculator- recasts values in above table
(units in RED can be selected on gauge. Other units for reference only)
|
| Accuracy |
±1% F.S., 1LSD |
Measuring Range
(at the time of Track) |
S1/oz: 3.0~100mNm
S2/oz: 3.0~200mNm
S5/oz: 0.030~0.5Nm |
Max. Rotational
Speed
(no-load) |
S1/oz: 85 rpm
S2/oz: 30 rpm
S5/oz: 13 rpm
S10: 18 rpm
S20: 18 rpm |
| Display |
4 digit LCD display |
| Operation |
Both CW and CCW motorized rotation |
| Measuring modes |
PP: Peak Mode displays PEAK torque value that will not change until a higher value is measured.
GO: Real Time Mode displays TRANSIENT torque values.
RG: Output Torque Data every 1/100 seconds. |
| Measurement start time |
Can be set up to 1 second in 0.1 second increments. |
| Measuring time |
Time can be programmed between 1 and 20 seconds. |
| Go/No go testing |
Programmable High and Low values; Green lamp (OK solid, NG blinking). |
| External input/output |
Signal output (open collector): Go and No Go
Data output: RS-232C (9600 baud) External start switch input |
| Data memory |
400 data |
| Power supply |
AC100V~240V |
| Bit size |
4mm diameter |
|
|
