|
|
|
TSD
Torque Screwdriver |
The new Check-Line® TSD manual torque measuring screwdriver is designed for accurate measurement of application and removal torque of screws and fasteners. An LCD display measures bi-directional torque in real-time or peak modes.
2 Models
TSD-50: Measuring Range: 0.45 - 4.50 lb-in
TSD-400: Measuring Range: 3.50 - 35.00 lb-in
The TSD has an accuracy of ± 2.5%* F.S and has 9 programmable setpoints that provide both an audible beep and green/red LED indicator for precision torque application. |
 Uses standard 1/4" bits | | Clockwise & Counter Clockwise Torque Measurement |
| | 9 Programmable Target Torque Setpoints | | Real time & Peak Torque Measurement |
|
| Model |
Range | Resolution |
| TSD-50 |
0.45 - 4.50 lb-in
5.0 - 50.0 cN-M
0.50 - 5.00 kg-cm | 0.01 lb-in
0.1 cN-M
0.01 kg-cm |
| TSD-400 |
3.50 - 35.00 lb-in
40.0 - 400.0 cN-M
4.00 - 40.00 kg-cm | 0.01 lb-in
0.1 cN-M
0.01 kg-cm | | |
|
DID-4
Digital Torque Screwdriver |  |
Peak, Real Time and Peak Down measuring mode (selectable) Runs on internal NiCad batteries (8 hour use) Auto shut-off after 10 min. of non-use USB data output for SPC capability | | Click image for more info
|
| | | | The TSD is supplied as a complete kit including the torque screw driver, small phillips bit, instruction manual, factory calibration cert and 1 AAA battery in a hard plastic carrying case. |
 |
|
Accuracy
|
+/- 2.5% F.S., +/- 1 LSD
|
|
Display
|
4 digit LCD
|
|
GO/NO GO testing
|
9 Programmable setpoints with both audible beep and Green/Red LED indicator
|
|
Power Supply
|
One (1) AAA Battery (included)
|
|
Auto Power Save
|
Automatic switch off after 5 minutes of non-use
|
|
Working Time
|
12 hours continuous use
|
|
Bit Size
|
1/4 Inch - 6.35 mm Hex
|
|
Weight
|
430g
|
|
Warranty
|
1 Year
|
|
|
Features
