|
|
|
TI-25DL
Data Logging Wall Thickness Gauge |
 Measuring Range in Steel
0.025 - 6.00 inches
0.60 - 150.0 mm
The new CHECK-LINE TI-25DL accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!
The TI-25DL incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.
The gauge can be used in a Single Thickness Reading mode or in two alternative modes, the Scan mode and the and the Differential mode.  The Scan modes permits the user to "drag" the probe over a large measuring area where the minimum thickness encountered during the scan will be displayed. The Differential mode displays the difference ("+" or "-") from a set "nominal" value
|
 Resolution of 0.001" (0.01 mm) | | Selectable units of inch or mm
| | Large, backlit LCD display retains last reading
| | RS-232C Serial output for downloading stored data to a printer or computer | | Memory for 1000 data points in up to 10 batches |
| | Special-purpose probes are offered for a variety of applications | | Windows compatible data transfer program supplied at no additional cost. | | CE Certified | | Includes NIST-Traceable Calibration Certificate | | Made in the USA |
|
| | | NIST-Traceable Steel Test Block
3 Sizes Available |  | Precision Machined and Finished Includes NIST-Traceable Report and Test Data Includes Wooden Storage Box | | | Click image for more info
|
___________________________________________ |
| | | Uncertified Steel Test Block
For Ultrasonic Gauges |  | For convenient confirmation of thickness gauge calibration | | | Click image for more info
|
___________________________________________ |
| | | TICC-M
Protective Holder for Ultrasonic Gauges |  | Constructed from heavy duty Cordura Nylon Built-in belt loop | | | Click image for more info
|
___________________________________________ |
| | | CF12
Coupling Fluid |  | Used to create an ultrasonic coupling between the probe and material to be measured | | | Click image for more info
|
___________________________________________ |
| | | TI-25-UW-50
50 Foot Underwater Probe / Cable Assembly |  | 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors. | | | Click image for more info
|
___________________________________________ |
| | | V-Block
Transducer Holder |  | The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas. | | | Click image for more info
|
___________________________________________ |
| | | P-25DL
Portable Printer for TI-25DL |  | Small, portable and easy to use Prints statistical data from the TI-25DL Ultrasonic Wall Thickness Gauge | | | Click image for more info
|
___________________________________________ |
| | | DataComm
Software |  | Free data acquisition software | | | Click image for more info
|
|
 |
Minimum Radius
for Convex Surfaces |
0.350" (8.89 mm) |
| Minimum Radius
for Concave Surfaces |
3" (76.2 mm) |
 |
Minimum Headroom |
1" (25.0 mm) |
 |
Minimum Sample
Diameter |
0.150" (3.8 mm) |
 |
Minimum Substrate Thickness - F |
na |
| Minimum Substrate Thickness - NFe |
na |
| Range in Steel |
0.025-6.00" (0.60-150.0 mm) |
| Resolution |
.001" (0.01 mm) |
| Velocity Range |
6,500-33,000 ft./sec (2000-10,000 m/sec.) |
| Display |
4½ - Digit, 0.5" Backlit LCD |
| Probe |
7.5 MHz, 0.25" Diameter (6.35 mm) |
| Probe Wearface |
PEEK (Polyethlethylketone) |
| Cable |
4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). |
| Serial Output |
RS-232C (8, N, 1, user-set baud rate) |
| Temp. Limits |
Ambient: -20 to 120° F (-30 to 50° C)
Material: --ll0 to 200° F (-20 to 100° C
Special high temperature probes are optionally available. |
| Battery Type |
Two AA batteries |
| Battery Life |
200 hours |
| Weight |
7 ounces (196 g) |
| Size |
2.5 x 4.5 x 1.25"
(64 x 114 x 32mm) |
| Accessories Included |
Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
| Warranty |
Gauge: 5 Years
Probes: 90 Days |
| | | | The TI-25DL is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. |
 |
|
Model |
Description |
|
TI-25DL-H |
High Temperature for surfaces up to 650° F or 343° C |
|
TI-25DL-107 |
Cast Iron / Plastics |
|
TI-25DL-HW |
Heavy Wall (0.040-19.999") |
|
|
|
Features
